Protocol DOT VR User Manual

NOTE:
EMERGENCY LANDING
- Press the START (X) button and hold. The engine will shut off.
* The drone may drift a bit, especially in the first 30 seconds until the altitude
sensor gets a good fix on the position. Some drift is normal.
OPERATION: FLYING THE DRONE
TAKE–OFF:
1. Press the Auto Launch (B) button. The remote will beep and the drone will
hover a few feet off the ground. Then gently advance the throttle to a desired
height and release. The drone will hover at that height.*
OR
2. From Idle mode, gently advance the throttle up to a desired height and
release. The drone will hover at that height.*
LANDING:
1. Press the landing button to lower the drone to the ground.
OR
2. Push down on the throttle until the drone is on the ground.
UP
DOWN
7

Protocol DOT VR Specifications

General

Brand	Protocol
Model	DOT VR
Category	Drones
Language	English