Configuring the Display
17
The Picture-In-Picture menu allows you to turn on PIP and
change the mode, source, and position of PIP. The following
parameters may be set:
PIP Position
A sub-menu that controls the position of the secondary
video window when PIP is turned on. Use the four
direction options repeatedly to move the window
around the screen.
Freeze
When PIP is on, freezes the main window.
PIP Size
A sub-menu that sets the size and type of the PIP
window. The options are as follows:
• Off—Turns PIP off
• Small—Small PIP window
• Medium—Medium PIP window
• Large—Large PIP window
• PBP—Splits the screen in half, uses one half for the
primary video, and uses the other for the secondary
video
• POP—Reduces the size of the primary video window
and places a small PIP window outside the main window
PICTURE-IN-PICTURE
PIP POSITION
FREEZE
PIP SIZE
ENTER
ENTER
ON OFF
: Select MENU : Exit ENTER : Enter
PICTURE-IN-PICTURE
PIP POSITION
FREEZE
PIP SIZE
PIP Position
H POS: 85 V POS: 20
UP
DOWN
LEFT RIGHT
: Select MENU : Exit ENTER : Enter
PICTURE-IN-PICTURE
PIP POSITION
FREEZE
PIP SIZE
OFF
SMALL
MEDIUM
LARGE
PBP
POP
: Select MENU : Exit ENTER : Enter
1
PBP POPSMALL MEDIUM LARGE
2
11
1
1
2
2
2
2
OMPLTV32C.book Page 17 Thursday, June 2, 2005 9:07 AM
To Next Page
Loading...
