1
• Tape Measure
• Pencil
• Shims
• Drill & Drill Bits
• Utility Knife
• Hammer or Mallet
• Flat-Head Screwdriver
• Phillips Screwdriver
• Level
• High Quality Silicone Caulking in accordance with
ASTM C 920, Class 25 & Caulking Gun.
• AAMA approved Low-Expanding Window Insulation
Foam in accordance with ASTM C, 1620.
• 6" or 9" Adhesive Flashing Tape in accordance with
ASTM D-779 (new construction application)
GETTING STARTED
TOOLS & MATERIALS YOU WILL NEED
REMEMBER: ALWAYS USE THE APPROPRIATE PERSONAL PROTECTIVE EQUIPMENT.
Read these instructions carefully before starting installation. Product warranty does not cover damages
resulting from improper installation.
IMPORTANT NOTES BEFORE YOU BEGIN
• Inspect your package for any visible damages to the product. In addition, double check your paperwork
with label on product(s) and verify all information is a match. Open packaging to confirm style, color, handing
and that order was shipped complete. Double check size of new unit by comparing it for fit to opening. If
damages or irregularities are found, please document with pictures and call Customer Service, 1-800-669-4711.
• If you have ordered optional items, verify that they are included in packaging contents. This includes checking
for multiple packages (For example, 1 of 2 and 2 of 2).
To Next Page
Loading...