ORiNOCO
®
802.11n & 802.11ac Access Points - Hardware Installation Guide 7
1
Introduction
1.1 About ORiNOCO
®
802.11n & 802.11ac Access Points
Proxim’s ORiNOCO
®
802.11n & 802.11ac Access Point family comprises the following products, that are designed to deliver
flexible, scalable and reliable Data, Voice, and Video for small and medium Enterprise WLAN deployments.
1.2 Salient Features
AP-800/ AP-8000/ AP-8100/ AP-9100
• Easy operation and installation
• Provides wall mounting or ceiling option for flexible device installation.
• Distributed WLANs with Centralized Management.
• Management through a Web Interface (HTTP), Command Line Interface (CLI), Simple Network Management Protocol
(SNMP) and ProximVision Network Management System (PVNMS)
• Advanced 802.11i support for enterprise-grade security
This chapter contains information on the following:
• About ORiNOCO
®
802.11n & 802.11ac Access Points
• Salient Features
• Multiple-Input-Multiple-Output
Product(s) Description Image
ORiNOCO
®
AP-800 An indoor 802.11n Access Point with dual-band, 3x3 MIMO
(Multiple Input and Multiple Output) single radio which operates
either in 2.4 or 5 GHz. This connectorized unit comes with 3
omni-directional antennas.
ORiNOCO
®
AP-8000 An indoor 802.11n Access Point with dual-band, 3x3 MIMO
(Multiple Input and Multiple Output) dual-radio, where one
operates in 5GHz and other in 2.4GHz. This connectorized unit
comes with 6 omni-directional antennas, 3 per radio.
ORiNOCO
®
AP-8100 An indoor 802.11n Access Point with 2x2 MIMO (Multiple Input
and Multiple Output) dual-radio, where one operates in 5GHz
and other in 2.4GHz. This unit comes with 4 integrated
antennas, 2 per radio.
ORiNOCO
®
AP-9100 Proxim’s ORiNOCO® AP-9100 is an indoor 802.11ac +
802.11b/g/n dual radio Access Point with dual-band (5 & 2.4
GHz) and 3x3 MIMO (Multiple Input and Multiple Output). This
integrated unit comes with built-in 6 omni-directional antennas,
3 per radio.
To Next Page
Loading...
Need help?
General
