ORiNOCO
®
802.11n Access Points - Software Management Guide 118
Figure 7-1 Ethernet Interface Statistics
The Ethernet Interface Statistics screen contains the following information.
Ethernet Interface Statistics
Parameter Description
Type Specifies the type of interface.
MTU Specifies the largest size of the data packet transmitted on the bridge.
Physical Address Specifies the MAC address of the interface
Operational Status Specifies the current operational status of the ethernet interface.
In Octets Specifies the total number of octets received on the interface.
In Unicast Packets Specifies the number of unicast sub-network packets delivered to the higher level protocol.
In Non-Unicast
Packets
Specifies the number of non-unicast sub-network packets delivered to the higher level
protocol.
In Errors Specifies the number of inbound packets with errors and that are restricted from being
delivered.
Out Octets Specifies the total number of octets transmitted out of the interface.
To Next Page
Loading...
Need help?
General
