ORiNOCO
®
802.11n Access Points - Software Management Guide 131
Click Refresh, to view updated RADIUS Client Accounting statistics.
7.7 Logs
7.7.1 Event Log
Event Logs track all the events that occur during the operation of the device and display the event occurring time, event type,
and the name of the error or the error message. Based on the priority, the event details are logged and can be used for any
reference or troubleshooting.
To view Event Logs, do the following:
1. Navigate to MONITOR > Logs > Event Log. The Event Log screen appears.
Figure 7-12 Event Log
2. Select the appropriate log priority from the Log Priority box and click OK. Log priority may vary between Emergency,
Alert, Critical, Error, Warning, Notice, Info and Debug. (Refer SYSLOG Host Table)
3. To view the event logs for the selected log priority, click Show Event Log.
Figure 7-13 Event Logs for the Specified Log Priority
4. Click Hide Event Log, to hide the event logs.
Unknown Types Specifies the number of messages with unknown RADIUS message code since client startup.
Pkts Dropped Specifies the number of RADIUS accounting packets dropped by the device.
To Next Page
Loading...
Need help?
General
