ORiNOCO
®
802.11n Access Points - Software Management Guide 127
Click Refresh, to view updated IP ARP Table statistics and click Clear, to clear the IP ARP Table statistics.
7.5.2 Internet Control Message Protocol (ICMP) Statistics
‘ICMP Statistics’ allow you to monitor the message traffic that is received and transmitted by the device.
To view ICMP statistics, navigate to MONITOR > Network Layer > ICMP Statistics. The ICMP Statistics screen appears.
Figure 7-9 ICMP Statistics
The ICMP Statistics screen contains the following information:
Parameter Description
Index Specifies the interface type.
Physical Address Specifies the MAC address of a node on the network.
Net Address Specifies the corresponding IP address of a node on the network.
Type Specifies the type of mapping, that is dynamic or static.
Parameter Description
In Msgs/Out Msgs Specifies the number of ICMP messages that are received or transmitted by the device.
In Errors/Out Errors Specifies the number of ICMP messages that are received or transmitted by the device, but
determined as having ICMP-specific errors such as Bad ICMP checksums, bad length, etc. In
Errors on the wireless interface include CRC errors.
In Dest
Unreachs/Out Dest
Unreachs
Specifies the number of ICMP messages, received or transmitted by the device, that do not
reach the destination.
To Next Page
Loading...
Need help?
General
