ORiNOCO
®
802.11n Access Points - Software Management Guide 92
Click OK, to save the configured parameters.
6.1.2 Inventory Management
This section provides inventory information about the device. Navigate to MANAGEMENT > System > Inventory
Management. The System Inventory Management Table appears.
Figure 6-2 System Inventory Management Table
By default, the components information is auto-generated by the device. This information is standard and is used only for
reference purpose. Click Refresh, to view the updated System Inventory Management information.
: Wireless Card 2 is applicable only to dual-radio device.
6.1.3 License Information
Licensing is considered to be the most important component of an enterprise-class device which typically has a feature-based
pricing model. It is also required to prevent the misuse and tampering of the device by a wide-variety of audience whose
motives may be intentional or accidental. Licensed Features are, by default, set by the company.
Navigate to MANAGEMENT > System > License Information. The License Information screen appears.
GPS Longitude Specifies the longitude at which the device is installed.
To configure, enter a longitude value of maximum 255 characters (in the format required by
your Network Management System) in the GPS Longitude box.
GPS Latitude Specifies the latitude at which the device is installed.
To configure, enter a latitude value of maximum 255 characters (in the format required by
your Network Management System) in the GPS Latitude box.
GPS Altitude Specifies the altitude at which the device is installed.
To configure, enter an altitude value of maximum 255 characters (in the format required by
your Network Management System) in the GPS Altitude box.
To Next Page
Loading...
Need help?
General
