Proxim Tsunami MP-8100 Series - Initialization

Command Line Interface
Tsunami MP-8100 Reference Manual 29
Wireless Inactivity Timer
Enter the following command to configure the Wireless inactivity timer.
1.5.4.5 Radius
Security Radius Server Profile Table
Enter the following command to configure the Security Radius Server Profile table entries.
System Name(config)# wireless
Possible completions:
mimo mimo Configuration
exit Exits Back to Global Configure Mode
properties Properties Configuration
wireless-timer Wireless Inactivity Timer Configuration
worp Worp Configuration
System Name(config-wireless)# wireless-timer 5
Note: Setting the Wireless Inactivity Timer to 0 disables the timer.
System Name(config-wireless)#exit
System Name(config)#exit
System Name# show wireless wireless-timer
// WIRELESS IN-ACTIVITY INFORMATION //
Wireless In Activity Timer : 5
System Name(config)# radius
System Name(config-rad)#server-table
System Name(config-rad-server)# rowedit 1 secondary-index 1 entry-status enable
System Name(config-rad-server)# rowedit 1 secondary-index 1 ipaddress 169.254.128.133
System Name(config-rad-server)# rowedit 1 secondary-index 1 port 1200
System Name(config-rad-server)# rowedit 1 secondary-index 1 shared-secret public
System Name(config-rad)#exit
System Name(config-rad)#exit
System Name(config)#exit
System Name# show security radius-server
// RADIUS SERVER TABLE CONFIGURATION //
INDEX 1.1
Profile Type : primaryauthticationserver
Ipaddress : 169.254.128.133
Port : 1200
Shared Secret : ******
Entry Status : enable
INDEX 1.2
Profile Type : secondaryauthenticationserver
Ipaddress : 169.254.128.134
Port : 1812
Shared Secret : ******
Entry Status : disable