Proxim Tsunami MP-8100 Series - Network Configuration

Command Line Interface
Tsunami MP-8100 Reference Manual 46
Pir Port List Configuration
System Name(config-worpqos)# pir-port-list
System Name(config-worpqos-pirportlist)# rowadd 0 ?
Possible completions:
<[Enter]> Execute this command
comment Port Comment Configuration
end-port End Port Configuration
entry-status Table Entry Status
start-port Start Port Configuration
System Name(config-worpqos-pirportlist)# rowadd 0 entry-status 4
System Name(config-worpqos-pirportlist)# rowadd 0 comment string
System Name(config-worpqos-pirportlist)# rowadd 0 end-port 33000
System Name(config-worpqos-pirportlist)# rowadd 0 start-port 16000
System Name(config-worpqos-pirportlist)# rowadd 0 entry-status 4
System Name# show worp-qos pir-port-list
// WORP QOS PIR PORT TABLE CONFIGURATION //
INDEX 1
Start Port : 16000
End Port : 33000
Comment : Cisco VOIP
Entry Status : enable
INDEX 2
Start Port : 5060
End Port : 5061
Comment : Vonage VOIP-1
Entry Status : enable
INDEX 3
Start Port : 16000
End Port : 33000
Comment : string
Entry Status : enable