Proxim Tsunami MP-8100 Series - System Configuration

Command Line Interface
Tsunami MP-8100 Reference Manual 45
Pir Mac List Configuration
System Name(config-worpqos)# pir-mac-list
System Name(config-worpqos-pirmaclist)# ?
Possible completions:
exit Exits Back to Global Configure Mode
rowadd Enter 0 to create a new table entry
rowedit Enter row number to edit/delete
System Name(config-worpqos-pirmaclist)# rowadd 0 ?
Possible completions:
<[Enter]> Execute this command
comment Mac Entry comment
entry-status Table Entry Status
mac-address MAC Address Configuration
mac-mask Mac Mask Configuration
System Name(config-worpqos-pirmaclist)# rowadd 0 entry-status 4
System Name(config-worpqos-pirmaclist)# rowadd 0 mac-address 80:00:00:00:00:00
System Name(config-worpqos-pirmaclist)# rowadd 0 mac-mask 80:00:00:00:00:00
System Name(config-worpqos-pirmaclist)# rowadd 0 comment L2 Boradcast/Multicast
System Name(config-worpqos-pirmaclist)# rowadd 0 entry-status 4
System Name(config-worpqos-pirmaclist)#exit
System Name(config-worpqos)#exit
System Name(config)#exit
System Name#show worp-qos pir-mac-list
// WORP QOS PIR MAC TABLE CONFIGURATION //
INDEX 1
Mac Address : 00:00:00:00:00:00
Mac Mask : 00:00:00:00:00:00
Comment : All
Entry Status : enable
INDEX 2
Mac Address : 80:00:00:00:00:00
Mac Mask : 80:00:00:00:00:00
Comment : L2 Boradcast/Multicast
Entry Status : enable