Proxim Tsunami MP-8100 Series - Page 53

Command Line Interface
Tsunami MP-8100 Reference Manual 53
1.5.5.5 Telnet
Enter the following commands to configure the password, sessions, and port number for Telnet.
1.5.5.6 SSH
Enter the following commands to configure the sessions and port number for SSH.
System Name# configure
System Name(config)# management
System Name(config-mgmt)# telnet
System Name(config-mgmt-tel)# password admin
System Name(config-mgmt-tel)#port 80
System Name(config-mgmt-tel)#sessions 3
The sum of Telent and SSH sessions cannot be more than 10.
System Name(config-mgmt-tel)#exit
System Name(config-mgmt)#exit
System Name(config)#exit
System Name# show telnet
// TELNET CONFIGURATION //
Password : ******
Port : 80
Sessions : 3
System Name# configure
System Name(config)# management
System Name(config-mgmt)# ssh
System Name(config-mgmt-ssh)# port 23
System Name(config-mgmt-ssh)# sessions 5
The sum of Telent and SSH sessions cannot be more than 10.
System Name(config-mgmt-ssh)#exit
System Name(config-mgmt)#exit
System Name(config)#exit
System Name# show ssh
// SSH CONFIGURATION //
SSH Port : 23
Sessions : 5