PSG MAX CADDY - Cold Air Return Box Installation

62 pages

Save Page as PDF

To Next Page

To Previous Page

3.1 COLD AIR RETURN BOX INSTALLATION

Before installing the cold air return box, you need to remove the back panel gasket and the back panel as shown

below. To do so, remove the 8 screws.

Main Page

Default Chapter2
- Table of Contents2
Wood or Wood/Electric Combination Furnaces5
Chimney and Draft5
Safety Rules5
- General Requirements6
- Odour from the Paint6
- Ash Disposal6
- Creosote Build-Up and Removal6
- Smoke Detector7
- Door Glass7
- Glass Specifications7
- Ash Drawer7
- Ash Grate7
Appliance Installation8
- Cold Air Return Box Installation9
- Cold Air Ducting Support Installation11
- Control Pcb Installation and Connection14
- RTD SUPPORT BRACKET INSTALLATION and CONNECTION (Resistance Temperature Detector)16
- Servomotor Installation and Connection18
- Handles Installation20
- Unit Location20
- Clearances to Combustibles and Floor Protector21
- Flue and Barometric Draft Control Connection23
  - Damper24
- Fresh Air Intake Adapter Installation (Optional)24
- Parallel Installation26
- Electrical Element Installation - Wood-Electric Max Caddy (Optional)27
- Thermostat Installation28
- Installation of a Domestic Water Pre-Heating System (Optional)28
- Installation of an Air Conditioning Unit29
- Oil Burner Installation - Wood-Oil Max Caddy (Optional)29
Operating Instructions30
- Control System30
- First Use - General Information30
- First Use - Setttings30
  - The Use of the "BI-ENERGY" Function31
- Fan Control31
- Modes, Options, and Programming31
- Lighting35
- Preheating35
- Heating35
- Early Signs of an Overfired Furnace36
- Wood as Heating Fuel36
- Prolonged Power Failure36
- Chimney Fires37
Maintenance38
- Maintenance of the Exchangers38
- Chimney Maintenance39
- Maintenance of the Blower Motor39
- Filters39
- Door Gasket Maintenance39
Replacement Parts41
- Door Glass41
- Gasket41
General Electric Diagram with Beckett Oil Burner42
General Electric Diagram with Riello Oil Burner43
Electric Diagram with Optional Electrical Element44
Max Caddy Technical Data45
- General Technical Data45
- Technical Data - Electrical Element45
Max Caddy Bricks Layout46
Trouble Shooting47
Section B48
Wood/Oil Combination Furnace48
General Notes49
Draft and Chimney49
Oil Tank and Piping50
- Burner Pump50
Appliance Installation50
- Locating the Unit50
- Positioning the Appliance51
- Pipe Connector and Damper51
- Possible Installations52
- Combustion Air53
- Electrical Wiring53
- Thermostat53
- Fan Control53
- Combustion Safety Control53
- Combustion Adjustment and Verification54
- Electrodes Setting55
4- Appliance Start-Up56
5- Prolonged Closing56
6- Maintenance56
7- Electrical Diagrams58
8- Technical Data59
- Uh - Max Caddy59
Why Purchase through an Authorized Psg Dealer60
Psg Limited Lifetime Warranty (Regular)61
Psg Limited Lifetime Warranty (Privilege)62

PSG MAX CADDY - Cold Air Return Box Installation

Table of Contents

Related product manuals