VP Keypad Access Device
31
rev. 7-2017 114A3868.E
System Maintenance
The VP keypad requires a minimal amount of maintenance.
However, as with any electronic or mechanical device that is used
regularly, a small amount of maintenance done periodically will
extend the life of the product.
Periodic Visual Inspection
The VP should be inspected monthly. When performing the visual
inspection, look for the following items:
• Damage caused by contact with vehicles, vandalism, etc.
• Damage caused by water, rain, salt spray, etc.
• Breaks or cracks in the sealant where the keypad mounts to the
gooseneck stand or wall
Periodic Cleaning
• The keypad should be cleaned at least twice a year. More
frequent cleaning may be required in harsh environments.
Cleaning the Housing and Touch pad
Inspect and clean the housing and touch pad at least twice per
year.
To clean the housing, spray the unit with a mild household
cleaner then wipe it with a soft cloth.
Do not use harsh chemicals, abrasives, or petroleum-based
products as they can damage the finish on the device.
Do not immerse the device in water or use a pressure washer.
A small, soft brush (a toothbrush works well) can be used to
clean between the keys on the touch pad.
To Next Page
Loading...