FR
ES
EN
DE
IT
9
The engine power indicated in this document is the net output obtained by testing an engine from a production run according to Standard
SAE J 1349 at a given speed of rotation. The power of another production run engine may differ from this indicated value. The actual power
of an engine installed in a machine depends on various factors such as the speed of rotation, the temperature, humidity, atmospheric pres-
sure and maintenance conditions and other factors.
Engine model
Weight kg
Net output (*) KW
For engine revolutions rpm
Nominal power KW
Nominal engine revolutions rpm
Guaranteed acoustic pressure level
dB(A)
Acoustic pressure level at driver’s seat
dB(A)
Measurement uncertainty dB(A)
Measured acoustic pressure level
dB(A)
Measurement uncertainty dB(A)
Vibration level transmitted to operator’s hands
m/s²
Measurement uncertainty %
Velocity (a) 1 gear
(b) 2 gear
(c) 3 gear
Transmission
Stopping of blade
Cutting width cm
Cutting height
Blade rotating speed
Pressure
2,4
2,8
3,23
Rear wheels: by friction balancer - Instant Forward or Reverse movement.
Dead man’s handle at handlebar and engine + blade cut-out with circuit breaker on
handleba
65
Adjustable by adding or removing intermediate washer.
Mini 59mm - Maxi 85mm
2750 rpm at max. Setting. Start-up with automatic re-set starter rope
1,9 bar
GXV 340
150
6,6
3600
6,6
3600
105
88,6
1
101
1
4,2
2
To Next Page
Loading...