PullRite OE Series - Hitch Installation

11
2.09.21.RH.rev A
HITCH INSTALLATION
1. Place the (2) Brass Puck Washers into the OE pucks on the side closest to the cab, make sure to orient the Washer
bosses facing downward.
2. Place the SuperGlide onto the pucks. Make sure that the hitch is fully seated on the Brass Puck Washers.
INSERT (2) BRASS
PUCK WASHERS.
ON CAB SIDE
TAILGATE
The OE Series SuperGlide hitch can only be installed on vehicles equipped with the GM Tow Prep Package.