Pulsafeeder MicroVision EX User Manual

72-901-04 Rev A 8/12/2019
Page 13 of 24
Conductivity Probe Temperature
The MicroVision
EX
Toroidal Conductivity Probe contains a built sensor to measure
the cooling tower’s fluid temperature. The temperature measurement is reported in
both Fahrenheit and Celsius.
The following registers are available on all models.
Modbus Name
Start
Address
End
Address
Data
Type
Details
Conductivity
Probe Temp F
30109
30110
float
Conductivity Probe
Temperature in degrees
Fahrenheit
Conductivity
Probe Temp C
30111
30112
float
Conductivity Probe
Temperature in degrees
Celsius

Pulsafeeder MicroVision EX Specifications

General

Brand	Pulsafeeder
Model	MicroVision EX
Category	Controller
Language	English