Pulsar Axion 2 User Manual

Technical Maintenance
and Storage
Maintenance should be carried out no less frequently than twice a year, and
should consist of the following measures:
Wipe external plastic and metal surfaces with a cotton cloth to remove
dust and dirt. To avoid damage to the paint coating, do not use
chemically active substances, solvents, etc.
Clean the electric contacts of the Battery Pack and the device's battery
slot using a non-greasy organic solvent.
Check the objective and eyepiece lenses and if required, remove dust
and dirt (preferably using a non-contact method). Cleaning of the
exterior surfaces of the optics should only be done with products
specifically designed for this purpose.
Store the device in a carrying case. Remove the Battery Pack for long-
term storage.

Pulsar Axion 2 Specifications

General

Display Type	AMOLED
Video/Photo Recording	Yes
Built-in Memory	16 GB
Stream Vision 2 Compatibility	Yes
Ingress Protection	IPX7
Digital Zoom	4x
Display Resolution	1024x768
Wi-Fi	Yes
Sensor Resolution	640x480
Pixel Pitch	12μm