Pulsar AXION XQ38 User Manual

Precautions
Always use the APS 5 charger supplied with the device (or purchased separately) to
charge APS 5 batteries. Using an unsuitable charger can cause irreparable damage to
the battery and fire.
Do not charge the battery immediately after exposure to a cold environment. Let the
battery warm for at least 30 minutes before charging.
Do not leave the battery unattended while charging.
Do not use the charger if it has been modified or damaged.
Do not leave the battery in a plugged-in charger after charging is complete.
Do not expose the battery to high temperatures or open flames.
Do not use the battery as a power source for devices that do not support APS 5 batteries.
Do not disassemble or deform the battery or charger.
Do not drop or strike the battery or charger.
Protect the battery and charger from water and moisture.
Keep the battery out of the reach of children.

Pulsar AXION XQ38 Specifications

General

Sensor Resolution	384x288
Objective Lens	F38/1.2
Magnification	3.5-14x
Detection Range	1350 m
Display Type	AMOLED
Battery Life	Up to 6 hours
Frame Rate	50 Hz
Microbolometer resolution	384x288
Pixel Pitch	17 µm
Built-in video recorder availability	Yes
Format of video / photo files	.mp4 / .jpg
Built-in memory	16 GB
Degree of protection, IP code	IPX7
Wi-Fi	Yes
Stream Vision	Yes
Sensor	Microbolometer
Digital zoom	4x
Type	Thermal Imaging
Operating temperature range	-25°C to +50°C
Battery type	APS 5
External power supply	5V
Field of View	9.8x7.4°
Display Resolution	1024x768 pixels