PiP Function
The PiP (Picture-in-Picture) function allows you to see both the main image and a magnified
image in a dedicated window.
To turn on and off the PiP function see the PiP Mode section.
Press and hold the UP (4) button to change the magnification ratio in the PiPwindow.
The zoomed image is displayed in a dedicated window, while the image in the rest of the
screen is displayed at base magnification (3.5x).
When the PiP is turned on you can control both the discrete and smooth digital zoom. In
this case the zoom value changes only take place in the dedicated window.
When the PiP function is turned off, the screen will display at the magnification that was
set in PiPmode.
To see the button operation scheme click here.
To Next Page
Loading...
