Display-Off Function
This function deactivates the image transmission to the display by minimizing its brightness.
This allows the user to remain unseen. However, the device stays on.
When this function is in use, the device switches to the standby mode, which allows it to be
switched on instantly.
1.
When the device is on, press and hold the ON/OFF (5) button. The display goes out and
the message Display Off appears.
2.
Turn the display back on with a short press of theON/OFF (5) button.
3.
When you press and hold the ON/OFF (5) button, the display shows the message
Display Off with a countdown. Pressing & holding the button down for the duration of
the countdown will power the device off completely.
To see the button operation scheme click here.
To Next Page
Loading...
