NEW IN SOFTWARE VERSION "MASTERPIECE MAIN No.2.1" - 28-10-98
SECURITY CODES
The NEW Programmer's Code:
3, 4, 10, 9
This code is required to enter: Set User Access Levels and to Program / View the Patch (the
108 PMX Channel to 256 DMX "Slot" patching system released in Software Version 2.1 as a free
upgrade, which allows a Masterpiece 108 to drive 256 DMX channels or "slots").
This code should not be disclosed to people you do not want to program your Masterpiece.
The Operator's Code:
12, 6, 7, 1
This is now the ONLY code that allows Card / Memory transfers.
* * * * * PLEASE REMOVE THIS SHEET * * * * *
if you do not want the Lighting Operator to be able to change the User Access Levels or to
Program / View the Patch.
Paul F. Mardon, Technical Director, 28-10-98
File: MPN.Sam PAGE 11a of 11
Masterpiece
Software
Upgrades
To Next Page
Loading...
