Pulsar NX15 - Alarm Mode Functions; Alarm Setting

22
English
23
English
ALARM MODE
A
B
A
B
A
A
A
C D
or
C
D
Press to enter ALARM mode.
Press and hold for 2 to 3 seconds
to show ALARM SETTING display.
Press to select the item to be ad-
justed (ashing).
l
The alarm can be set to sound once every 24 hours.
l

You can preview the alarm sound by using the sound demonstration
function.
The hour digits start flashing.
Minute
Hour
Hour
Minute
a
a
Press to conrm the alarm setting
and return to ALARM mode.
Press to set the ashing digits.
NOTES
u
With each press of the button C (or D), the flashing digits increase (or decrease).
u
The flashing digits move quickly if button C or D is kept pressed.
u
If the watch is left untouched in the ALARM SETTING display with the digits
flashing, it will automatically return to the ALARM mode in 1 to 2 minutes.
u
When the 24-hour indication is selected in the TIME/CALENDAR mode, the
alarm is also displayed in the 24-hour indication.
u
When setting the hour digits in the 12-hour indication, check that AM/PM is
properly set.