Pulsar NX15 - Analogue Time Setting

6
English
7
English
SCREW DOWN CROWN
[for models with screw down crown]
Locking the crown
1
Turn Crown counterclockwise until you no
longer feel the threads turning.
2
Crown can be pulled out.
1
Push Crown back into normal position.
2
Turn Crown clockwise while pressing it
lightly until tight.
Unlocking the crown
TIME/CALENDAR MODE
2
1
3
* This illustration is simplified
for the purpose of explanation.
1
Pull out when the second hand
is at the 12 o’clock position.
2
Turn to set the hour and minute
hands to the correct time.
CROWN
Second hand
Minute hand
Hour hand
ANALOGUE TIME SETTING
The second hand will stop on the
spot.
CROWN
To set t h e h a n d s ac c u rate l y,
advance the minute hand four to
five minutes ahead of the correct
time, then slowly move it back to
the exact minute(s).
3
Push back simultaneously with
a time signal.