Pulse Secure PSA7000 - Component Specifications

© 2017 Pulse Secure, LLC. All rights reserved
16
PSA7000 Hardware Guide
Environmental Requirements
Category
PSA7000c and PSA7000f
Operating temperature
10°C to 35°C (50°F to 95°F)
Storage temperature
(-40°C) ~ 60°C (-40°F ~ 140°F)
Relative humidity (operating)
8% ~ 90% (non-condensing)
Relative humidity (storage)
5% - 95% (non-condensing)
Component Specifications
Category
PSA7000c and PSA7000f
CPU
Haswell E3-1275
Memory
32GB
Storage HDD
2 x 1TB SATA3, hot-swap
Security module
1x TPM 1.2
Network ports
• PSA7000c: 2 Dual-port 1G/10G Ethernet Intel X540 (4 x RJ45)
• PSA7000f: 2 Dual-port 1G/10G Ethernet Intel 82599ES (4 x SFP+)
External I/O ports
• 1x console RJ-45 port
• 1x10/100/1000 management port
Cooling
4x 4cm counter-rotating fans
The PSA7000f model offers SFP+ interfaces supporting both 10G fiber and 10G copper networks.
10G fiber solution supports either an Avago SFP+ direct attached 3 meters transceiver cable (PSA-SFP-10GE-SR-
3M), the Avago SFP+ detached transceiver with 5 meters fiber cable (PSA-SFP-10GE-SR-DE), or any of the SFP+
fiber transceivers listed below using from 5 meters to 25 meters cable.
Listed below are the supported detached 10Gb/s SFP+ fiber transceivers:
• Avago AFBR-709DMZ
• Cisco SFP-10G-SR-S Module (S-Class)
• Cisco SFP-10G-SR Module
• Juniper EX-SFP-10GE-SR
• HP X132 10G SFP+ LC SR