2. For example, if your screen looks like this:
Press 1 to install the Pulse Connect Secure package. Press 2 to install the Pulse Policy Secure package. Press 3 to
install the Pulse One Service.
3. Enter y to proceed, and then enter y to accept the license terms (or enter r to read the license first).
4. Follow the directions in the console, and enter the machine information for which you are prompted,
including the following:
•
IP address of the internal port (you configure the external port through the administrator Web console
after initial configuration)
•
Network mask
•
Default gateway address
•
Primary DNS server address
•
Secondary DNS server address (optional)
•
Default DNS domain name (for example, acmegizmo.com)
•
WINS server name or address (optional)
•
Administrator username
•
Administrator password
•
Common machine name (for example, connect.acmegizmo.com)
•
Organization name (for example, Acme Gizmo, Inc.)
•
Enter random text (used for authentication certificate)
After you perform the basic setup, you are ready to license the software, verify accessibility, and complete
the configuration process through the PSA7000 administrator Web console.
To Next Page
Loading...
