PURE Avalon N5 User Manual

7
Switching your Avalon N5 on and off
If you have a ChargePAK F1 rechargeable battery (available seperately), insert it before you switch your
Avalon N5 on. Read more about using a ChargePAK on page 17.
To switch your Avalon N5 on:
• Push down and release the Power/Volume dial until it pops up.
Note: When you switch your Avalon N5 on for the first time, it starts tuning to digital radio stations.
After the autotune is complete, you can start listening to digital radio.
To switch your Avalon N5 off or put it in standby:
Push down and release the Power/Volume dial until it latches down.
• If your Avalon N5 is connected to a power socket, your Avalon N5 enters standby. In standby, your
Avalon N5 uses a low amount of power and displays the time and date on the screen.
• If your Avalon N5 is being powered by a ChargePAK, your Avalon N5 switches off.
Note: Any alarms set will not sound if your Avalon N5 is being powered by a ChargePAK and you switch
your unit off.
Changing the volume
To change the volume:
• To increase the volume, turn the Power/Volume dial clockwise.
• To decrease the volume, turn the Power/Volume dial anticlockwise.
EN

PURE Avalon N5 Specifications

General

Brand	PURE
Model	Avalon N5
Category	Radio
Language	English