10
Your Elan E3 has two alarms and a sleep timer.
The alarm features are only functional when your Elan E3 is connected to mains power.
Setting an alarm
1. Press the Menu button and turn and press the Select dial to select ‘System Settings’.
2. Turn and press the Select dial to select ‘Alarms’.
3. From the ‘Alarm’ menu, turn and press the Select dial to select either ‘Alarm 1’ or ‘Alarm 2’.
4. Press Select to turn ‘Alarm’ to ‘On’.
5. Turn and press the Select dial to change the ‘Frequency’
6. Select ‘Wake Up time’ by turning and pressing the Select dial, turn the dial to adjust the hours and
minutes, pressing Select to conrm each section.
7. Turn and press the Select dial to select ‘Source’. Turn and press the Select dial to choose between
‘Buzzer’, ‘Digital Radio’ or ‘FM’, then press the Select dial to conrm.
8. If you’ve chosen ‘Digital Radio’ or ‘FM’ radio, turn and press the Select dial to select ‘Preset’. To play
the station you last listened to, turn and press the Select dial to select ‘Last listened’ or turn and press
the Select dial to choose a radio station from the preset list.
Note: Skip this step if you are setting a Tone alarm.
9. Turn and press the Select dial to select ‘Duration’. Turn and press the Select to set the duration that
the alarm will sound in minutes.
10. Turn and press the Select dial to select ‘Volume’. Turn and press the Select the dial to set the volume
of the alarm.
Setting the sleep timer
1. Press the Menu button and turn and press the Select dial to select ‘System Settings’.
2. Turn and press the Select dial to select ‘Sleep’.
3. Turn and press the Select dial to adjust the length of the sleep timer.
Setting the kitchen timer
1. Press the Menu button and turn and press the Select dial to select ‘System Settings’.
2. Turn and press the Select dial to select ‘Kitchen timer’.
3. Turn and press the Select dial to adjust the length of the kitchen timer.
Cancelling a sounding alarm
Press Standby to cancel any sounding alarm or press Source to cancel and leave the radio on.
Snoozing a sounding alarm
To snooze a sounding alarm, press the Select dial. The display will show a countdown timer to show
how long the alarm will snooze for. To adjust the amount of time the alarm will be snoozed by, press the
Select dial to change the snooze duration in 5 minute intervals up to 15 minutes, and then 30 minutes.
To cancel a snoozing alarm press the Standby button.
Setting alarms and timers
Downloaded from www.vandenborre.be
To Next Page
Loading...
Need help?
General
Weight and Dimensions
