11
EN
Choosing an equalisation setting
Your Elan E3 includes equalisation audio presets and also includes a loudness setting to help improve
your listening experience when listening at a low volume.
1. Press the Menu button to view the main menu.
2. Turn and press the Select dial to select ‘System settings’ > ‘Equalizer’.
3. Turn and press the Select dial to choose between ‘Flat’, ‘Classic’, ‘Jazz’, ‘Pop’, ‘Rock’, ‘News’ and
‘Custom’. If you want to use a custom equalisation setting, select ‘Custom’ (see below for more
information).
Creating a custom equalisation setting
You can manually set the bass and treble levels and specify if the loudness setting is enabled to help
improve your listening experience when listening to your Elan E3 at a low volume.
Setting the bass and treble manually
1. Press the Menu button to view the main menu.
2. Turn and press the Select dial to select ‘System settings’ > ‘Equalizer’ > ‘Custom setup’.
3. Turn and press the Select dial to choose ‘Bass’ or ‘Treble’.
4. Turn and press the Select dial to set the level from ‘-3‘ (low) to ‘+3’ (high).
Switching on the loudness setting
If listening to your Elan E3 at low volume, you can use the loudness setting to improve your listening
experience.
To switch the loudness setting on or off:
1. Press the Menu button to view the main menu.
2. Turn and press the Select dial to select ‘System settings’ > ‘Equalizer’ > ‘Custom setup’.
3. Turn and the Select dial to scroll down to ‘Loudness’.
4. Press the Select dial to toggle the loudness setting ‘On’ or ‘O’.
Choosing a custom equalisation setting
When you have finished setting up your profile, carry out the following to listen to it on your Elan E3.
1. Press the Menu button to view the main menu.
2. Turn and press the Select dial to select ‘System settings’ > ‘Equalizer’.
3. Turn and press the Select dial to choose ‘Custom’.
Options and settings
Downloaded from www.vandenborre.be
To Next Page
Loading...
