PURE Elan E3 User Manual

7
EN
Getting started
Quick set up
1
Press the Standby button to switch your Elan E3 on.
2
Wait for your radio to complete an Autotune and find all available digital stations. When the
Autotune is complete, a station will start playing.
3
10:27
Scanning...
Stations: 25
Full Scan
• Unclip the aerial and fully extend it (steps A and B).
• Insert the jack of the supplied mains adapter into the socket on the rear of the radio (C).
• Plug the mains adapter into the mains supply (D).
B
A
C
D
Downloaded from www.vandenborre.be

PURE Elan E3 Specifications

General

Radio type	Portable
Tuner type	Analog & digital
FM band range	87.5 - 108 MHz
DAB III band range	174 - 240 MHz
Supported radio bands	DAB, DAB+, FM
Radio Data System (RDS)	Yes
Preset stations quantity	40
RMS rated power	- W
Number of built-in speakers	1
Display type	TFT
Display diagonal	2.8 \
USB connector type	Micro-USB
Headphone connectivity	3.5 mm
Antenna type	External
MP3 playback	No
Product color	Red, White
Volume control	Rotary
Apple docking compatibility	Not supported
Cables included	DC
Power source	DC/Battery
DC input voltage	6 V
Battery technology	Alkaline
Compatible battery sizes	AA
Number of batteries supported	4

Weight and Dimensions

Depth	53 mm
Width	200 mm
Height	115 mm