7. If you have selected a DAB or FM alarm you can push the Tune dial to select ‘Alarm volume’
and turn to adjust the volume level for the alarm from 1 (very quiet) to 32 (very loud).
That’s it! You can see if the alarm is currently switched on in the ‘Full screen time’ display (see
page 5). Alarms can be set and adjusted from standby by pressing the Menu button.
To cancel a sounding tone or radio alarm
When a tone alarm is sounding, push the Tune dial or press Standby to cancel the alarm. To
cancel a DAB or FM alarm and return the radio to standby, press the Standby button.
Kitchen timer
EVOKE-1S has a countdown timer which will sound an alarm after a set time period – handy for
use in the kitchen.
To set a kitchen timer
1. Press the Timer button.
2. Turn the Tune dial to change the hours and push to confirm. Turn again to change the minutes
and push to confirm and start the countdown timer.
The alarm will sound after the time period you have set whether the radio is on or in standby.
Cancel the beeping alarm tone by pressing any button on the radio.
To stop and reset the kitchen timer to zero
To stop and reset the kitchen countdown timer to zero before it sounds a beeping tone, press and
hold down the Timer button for three seconds until you see the message ‘Timer cleared’.
Setting the alarm & timer
To Next Page
Loading...
