Updating Evoke’s firmware
Firmware updates for your Evoke may be made available in the future. If you register your product and
include a valid e-mail address you will receive notification of firmware updates and information on how to
update the firmware for your Evoke (register at account.pure.com). Alternatively, visit
http://support.pure.com at any time to check for available firmware updates.
Changing the display brightness level
You can adjust the brightness of the display for when Evoke is switched on and in standby. To change the
brightness level:
1. Press the Menu button.
2. Turn and press the Select dial or use the <Select> buttons on the remote control to choose ‘
Brightness
’.
3. Turn and press the Select dial
or use the <Select> buttons on the remote control
to choose either
‘Normal Mode’ to change the settings that apply when Evoke is switched on, or ‘Standby Mode’ to
change settings that apply in standby.
4. Turn the Select dial
or use the < > buttons on the remote control
to vary the brightness level between
1 (dim) and 5 (bright) and push the Select dial or press the Select button on the remote control to
confirm your preferred setting.
Setting the time and date
The time and date on Evoke are automatically set by the digital radio signal. If the time or date does not
update automatically, you can manually set it using this option.
Note: Any time or date updates received by a digital broadcast will override manual settings.
Time and date synchronization options
You can synchronize the time and date on Evoke using either the FM or digital radio signal or you can
choose to synchronize the time using both signals.
To specify the clock synchronization options:
1. Press the Menu button.
2. Turn and press the Select dial or use the <Select> buttons on the remote control to choose ‘Date/
Time Set’.
3. Turn and press the Select dial to choose between the ‘DAB’, ‘FM’ and ‘Both’ clock synchronization
options.
Setting the time and date manually
1. Press the Menu button.
2. Turn and press the Select dial
or use the <Select> buttons on the remote control
to choose ‘Date/
Time Set’.
3. Turn and press the Select dial
or use the <Select> buttons on the remote control
to choose ‘Manual’.
4. Turn and press the Select dial
or use the <Select> buttons on the remote control
to set the hour.
Repeat to adjust the minutes.
Note: If you have set your Evoke to use the 12 hour time format, make sure that you select the ‘AM’ or
‘PM’ version of the hour before pressing the Select dial or Select button on the remote control.
5. Turn and press the Select dial or
use the <Select> buttons on the remote control
to set the day of the
month. Repeat to set the month and year.
Changing the time format
1. Press the Menu button.
2. Turn and press the Select dial or
use the <Select> buttons on the remote control
to choose
‘Time Mode’.
3. Turn and press the Select dial or
use the <Select> buttons on the remote control
to choose between
‘12 Hours’ and ‘24 Hours’.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
