20
Changing the alarm snooze time
1. Press the Menu button.
2. Turn and press the Select dial or
use the <Select> buttons on the remote control
to choose
‘Snooze adjust’.
3. Turn and press the Select dial to change the snooze time between 1 and 10 minutes.
Choosing an equalisation setting
Evoke includes six equalisation audio presets and also includes a loudness setting to help improve your
listening experience when listening to Evoke at a low volume.
Using a predefined equalisation setting
To use a predefined equaliser setting on Evoke:
1. Press the Menu button.
2. Turn and press the Select dial or
use the <Select> buttons on the remote control
to choose ‘Set EQ’.
3. Turn and press the Select dial or
use the <Select> buttons on the remote control
to choose between
‘Flat’, ’Rock’, ‘Pop’, ‘Classic’, ‘Jazz’ and ‘News’.
Creating a custom equalisation setting
Setting the bass and treble manually
1. Press the Menu button.
2. Turn and press the Select dial or
use the <Select> buttons on the remote control
to choose ‘Custom’.
3. Turn and press the Select dial or
use the <Select> buttons on the remote control
to choose ‘Bass’
or ‘Treble’.
4. Turn and press the Select dial or
use the <Select> buttons on the remote control
to set the level from
‘-5‘ (low) to ‘5’ (high).
Switching on Evoke’s loudness setting
If listening to Evoke at low volume, you can use the loudness setting to improve your listening experience.
To switch the loudness setting on or off:
1. Press the Menu button.
2. Turn and press the Select dial or
use the <Select> buttons on the remote control
to choose ‘Custom’.
3. Turn and press the Select dial or
use the <Select> buttons on the remote control
to choose
‘Loudness’.
4. Turn and press the Select dial or
use the <Select> buttons on the remote control
to turn the loudness
setting ‘On’ or ‘Off’.
Choosing a room equalisation setting
Evoke includes two predefined room equalisation settings that lets you optimise your listening experience
based on the type of room you have placed Evoke in.
Changing the room equalisation setting
To change the room equaliser setting on Evoke:
1. Press the Menu button.
2. Turn and press the Select dial or
use the <Select> buttons on the remote control
to choose
‘Room EQ’.
3. Turn and press the Select dial or
use the <Select> buttons on the remote control
to choose between
one of the following room equaliser settings:
EQ1: Choose this option for detailed, clear audio, which is ideal for places like lounges and bedrooms.
EQ2: Choose this option for a slightly softer audio response, which suits places with harder
materials and surfaces like kitchens and conservatories.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
