26
FM radio settings
Note: You can only see the FM radio settings when you have selected ‘FM’ as the radio source.
FM stereo option
You can choose between stereo or mono reception when listening to FM radio. Mono may improve clarity
where stereo signals are weak.
To change between Stereo or Mono reception:
1. Press the Menu button.
2. Turn and press the Select dial or use the <Select> buttons on the remote control to choose ‘Audio
Setting’.
3. To use mono reception, turn and press the Select dial or use the <Select> buttons on the remote
control to choose ‘YES’. If you want to use stereo reception turn and press the Select dial or use the
<Select> buttons on the remote control to choose ‘NO’.
FM scan
You can choose whether Evoke automatically stops at the next available FM station or the next available
FM station with a strong signal when scanning for an FM station. To change the FM scan setting:
1. Press the Menu button.
2. Turn and press the Select dial or use the <Select> buttons on the remote control to choose ‘Scan
Setting’.
3. To automatically stop at the next available FM station with a strong signal, turn and press the Select dial
or use the <Select> buttons on the remote control to choose ‘YES’. To automatically stop at the next
available FM station regardless of the signal strength, turn and press the Select dial or use the <Select>
buttons on the remote control to choose ‘NO’
To Next Page
Loading...
Need help?
General
Weight and Dimensions
