PURE Evoke C-F6 User Manual

6
• Fit the correct pin connector to the supplied mains power adapter.
Getting started
Quick set up
1
• Unclip the aerial and fully extend it (steps A and B).
• If you want to connect Evoke to you network using an Ethernet cable, connect an Ethernet cable
from the Ethernet port on the back of Evoke to your router (C).
• Insert the jack of the supplied mains adapter into the socket on the rear of the radio (D).
• Plug the mains adapter into the mains supply (E).
2
The first time you switch on Evoke you will be asked if you would like to run the setup wizard,
which will help you connect Evoke to your network. If you want to run the setup wizard now, turn
and press the Select dial to select ‘Yes’ and follow the prompts on screen. To set up Evoke later,
turn and press the Select dial to select ‘No’.
Note: For more information on using the setup wizard see page 18.
3
Setup wizard
Start now?
YES
NO
D
E
B
A
C

PURE Evoke C-F6 Specifications

General

Radio type	Internet
Tuner type	Digital
Supported radio bands	DAB, DAB+, FM
Preset stations quantity	36
RMS rated power	20 W
Bluetooth	Yes
Wi-Fi standards	802.11a, 802.11b, 802.11g
Bluetooth profiles	A2DP
Disc playback modes	Random, Repeat track
Playback disc types	CD, CD-R, CD-RW
Security algorithms	WEP, WPA, WPA2, WPS
Docking station included	No
Apple docking compatibility	Not supported
Headphone outputs	1
Headphone connectivity	3.5 mm
Power source	AC
AC input voltage	230 V
Antenna type	External
Product color	Brown, White
Volume control	Rotary
Internet radio services supported	Spotify
Number of built-in speakers	2
Display type	TFT
Display diagonal	2.8 \

Weight and Dimensions

Depth	223 mm
Width	380 mm
Height	145 mm
Weight	4200 g