The FlexiPump system is designed for use in a medical reprocessing area. It is engineered to provide opti-
mal flushing capacity, installation flexibility, and easy use and maintenance. It can be used independently or
with a Pure Station™ Sink Insert, and has been fully tested for use with a wide variety of reusable lumened
devices, including rigid and flexible endoscopes, minimally invasive surgical devices, ocular and robotic
devices, and suction tips.
The FlexiPump System is adaptable for counter, sink or wall installation near a water source. Accessories
are available from Pure Processing to adapt the system to multiple additional uses. The FlexiPump tube sets
connect to most devices, with or without luer locks and/or ports. A pressure relief feature is included to help
protect scopes during flushing. The FlexiPump system can be used alone or can augment existing pumps.
Up to three devices can be flushed at once through each FlexiPump unit.
OVERVIEW
FlexiPump™ Independent Flushing System
DESCRIPTION
Components
Removable cap with side tabs
Electric cord
Pump housing
Internal Components
Supply Tube (connects to medical devices)
Rotor
Squeeze Tube
Key Pad
Forward Flush button
Stop Cycle button
Speed Control button
Impact Cycle button
FlexiPump™ Independent Flushing System User Manual © Pure Processing, LLC. 2017 All rights reserved.
3
To Next Page
Loading...