PURE FlexiPump - Connecting Devices to the FlexiPump; Connecting Devices with Luer Locks; Connecting Devices with Luer Ports; Connecting Devices Without Luer;Ports

Many lumened/channeled devices can be properly connected and flushed with the FlexiPump system.
OPERATION
Connecting devices to the FlexiPump system
For devices with luer locks
Twist the FlexiPump tube collar onto the
device with a luer, until locked
Flush the device following manufacturer’s
recommendations
8
For devices with luer ports
Pull the tube collar back
Insert the slip tip into the device
Flush according to manufacturer’s
recommendations
For devices without luer locks or ports
Use a cup adaptor to create a tight seal
Flush according to manufacturer’s
recommendations
For devices with female luer locks
Use a female-to-female luer lock adapter
Flush according to manufacturer’s
recommendations
FlexiPump™ Independent Flushing System User Manual
© Pure Processing, LLC. 2017. All rights reserved.