Your FlexiPump system does not come with a tube set installed. To install your first tube set, please see the
Maintenance section in this manual (page 12). ou can also visit our website for a video tutorial on how to
install your tube sets.
OPERATION
Set-up: new FlexiPump Independent Flushing System
The Nest Accessory can be set up on any counter near a sink. Simply insert the FlexiPump system into the
Nest with tubes facing the labeled front of the accessory. Plug the power supply cord into an electrical outlet.
Set-up: with Nest Accessory
The Sink Rail accessory (sold separately) adheres to the top inside surface of a clean sink at the top
edge. Once the rail is attached, lock the back of the FlexiPump system onto the sink rail track, then plug
the FlexiPump power supply cord into a wall outlet. PureStation
TM
systems also include a sink rail track for
locking the FlexiPump system onto the side of the Insert.
Set-up: with Sink Rail Accessory
Use extra caution with sink
wall installations to avoid
impact with hard surfaces.
FlexiPump™ Independent Flushing System User Manual © Pure Processing, LLC. 2017. All rights reserved.
4
Do not place pumps directly
under a water supply.
To Next Page
Loading...