EasyManuals Logo

PURE Jongo S3 User Guide

PURE Jongo S3
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
15
Using a ChargePAK F1
ChargePAK F1 makes Jongo truly portable, so you can enjoy the programmes you love in the garden or at
the beach.
Because it’s rechargeable ChargePAK is much cheaper than regular batteries. It’s also more eco-friendly
because it reduces the amount of toxic substances sent to landfill. And, because it’s a fit-and-forget
solution that charges whenever Jongo is connected to the power outlet, it’s much more convenient than
standard rechargeable batteries.
When Jongo is being powered by a ChargePAK F1, Jongo will only remain in the sleep state for five
minutes before powering off if it does not receive any audio.
Replacing the ChargePAK F1
1. Switch Jongo off and disconnect from the mains power supply.
2. Turn Jongo upside down and use a screwdriver to open the
battery compartment on the base of Jongo.
3. Replace ChargePAK so that the Pure label is facing the battery
compartment lid and the ChargePAK contacts line up with the
three terminals in the battery compartment.
4. Replace the battery cover and secure with the screw, ensuring
that the screw is not over-tightened, and connect your product
to a power supply.
5. ChargePAK will begin charging.
Note: When charging your ChargePAK for the first time or
after an extended period of inactivity it is recommended that it
is charged for around 24 hours to ensure full battery power. If
ChargePAK is completely flat, there may be a slight delay before
the battery charging indicator is displayed.
Note: It is normal for your ChargePAK to get warm, especially
during charging. Your ChargePAK will give years of trouble-free use
under normal circumstances, but like all rechargeable batteries its
efficiency will gradually reduce with age.
Important: Jongo can only be powered with a Pure ChargePAK F1
and is not compatible with any other batteries, either disposable or
rechargeable, or any other ChargePAK model.

Other manuals for PURE Jongo S3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the PURE Jongo S3 and is the answer not in the manual?

PURE Jongo S3 Specifications

General IconGeneral
Speaker type-
Woofer diameter88.9 mm
Tweeter diameter19.05 mm
Number of drivers4
Number of speakers1
Audio output channels1.0 channels
CertificationCE, US FCC/ETL, C-Tick, ETSI EN 300 401
Recommended usageMobile phone / Smartphone
Audio formats supportedAAC, MP2, MP3, WMA
Subwoofer includedYes
Impedance- Ω
Frequency range- Hz
RMS rated power20 W
Product typeMono portable speaker
Product colorWhite
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technologyWired & Wireless
Power source typeAC, Battery
Weight and Dimensions IconWeight and Dimensions
Depth139 mm
Width131 mm
Height135 mm
Weight1000 g

Related product manuals