7
1. Position Jongo in range of your wireless network.
2. Insert the connector of the mains power adapter
into the socket on the rear of Jongo and plug in
to the mains supply. When Jongo is first plugged
in, the Power light will pulse red. When Jongo
has finished booting up, the Power light will light
green.
9V DC
Preparing Jongo to connect to a wireless network
Typical wireless setup
Jongo can be connected to your network using a wireless or wired connection.
We recommend using the wireless connection method, which allows you to position your Jongo anywhere
within range of your wireless network.
If you want to use the wired connection method, you will need to remove the Bluetooth adapter and plug
in an optional Pure USB Ethernet adapter. See the Pure website for more information on using a USB
Ethernet adapter. After connecting Jongo to your network, you will be able to start streaming tracks to
Jongo (see page 9).
Getting started
Jongo supports two wireless connection methods. See the following page to finish setting up your wireless
connection manually. If you have a router that supports WPS, you can use the simpler Push Button
Configuration method to connect Jongo to your wireless network. See page 14 for more information.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
