EasyManua.ls Logo

PureLink WHD100T - 9 Technical Data; Resolutions; Wireless; Transmitter (TX)

PureLink WHD100T
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 8 -
9. TECHNICAL DATA
RESOLUTIONS
Supported HDTV resolution (HDMI) 480p, 576p, 720p, 1080i, 1080p
Supported PC resolution (max.) 1600x1200 px
Supported 3D formats 1080p @23.98/24 Hz, 720p @59.94/60/50 Hz
Supported audio formats (digital) Up to 6 Mbps AC-3 and DTS
WIRELESS
Operational frequency 4.9 - 5.9 GHz
Operational range Up to 10 meters LOS (line of sight)
System latency No latency (<1ms)
TRANSMITTER (TX)
HDMI input 1x HDMI-A (19-pin female)
Dimensions 30 x 82.2 x 17.5 mm
RECEIVER (RX)
HDMI output 1x HDMI-A (19-pin female)
Dimensions 194.8 x 146.8 x 31 mm
POWER SUPPLY
Switch mode power adapter 100-240VAC @ 50-60Hz, 5VDC 1.5A
Specifications may be modified without prior notice.
FREQUENCY BAND & MAX. RF POWER
TRANSMITTER
5180-5240MHz: 8.29dBm
5260-5350MHz: 8.29dBm
5500-5700MHz: 8.66dBm
RECEIVER
5180-5240MHz: 22.03dBm
5260-5350MHz: 22.88dBm
5500-5700MHz: 22.04dBm
10. CLEANING
Before cleaning the product must be disconnected from mains socket and all electrical loads.
Only use dry and soft cloth to clear the housing of the Product.
Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as they can cause damage to the
housing and malfunctioning.
To clean the product, a dry, soft and clean cloth is sufficient. Do not apply too much pressure to the housing as this may
cause scratch marks.

Table of Contents

Related product manuals