6
Note: e Direct Plus nosebox must be mounted with the wires facing down
to help prevent water intrusion.
Direct Controller Mounting Complete.
MOUNTING THE NOSEBOX
Step 1: Mount the Direct nosebox
at the front of the trailer via the
mounting holes on the mounting
plate.
Note: Do not block the LED status
decal on the side of the Direct
when mounting the nosebox.
Note: e mounting plate can
be removed if space is an issue
or if a standard bolt pattern
is wanted. Simply remove the
plate and mount the nosebox
to the trailer using the supplied
mounting screws and the
standard bolt holes inside the
nosebox.
To Next Page
Loading...
