QuickDraw
Storage and Semi-instantaneous
Boiler Water Heater
5 PV500-26 05/13
Typical QuickDraw
®
Semi-Instantaneous Construction
1. U-tube Heat Exchanger 10. Boiler Water Outlet
2. Control Enclosure 11. Electronic Operating Control *
3. Potable Water Inlet 12. Boiler Water Temperature Gauge *
4. Potable Water Outlet 13. Boiler Water Pressure Gauge *
5. Intra-tank Circulator * 14. Tank Purge Valve *
6. Relief Valve 15. Tank Pressure Gauge *
7. Isolation Shutoff Valve *
8. Tank Drain Valve * Optional
9. Boiler Water Inlet ** Supplied by Others
(shown with dashed lines)
NOTE: Components, controls and connection locations may vary.
To Next Page
Loading...
