Pyle PIPCAM5 User Manual

More Security ,More Convenience
- 37
-
3.13 Indicator Settings
Figure 8.6
Set the pilot lamp mode, the following three options:
(1) Non-connected network out: Twinkle while connect to the internet and turn off when departed
(2) Non-connected network with more slow-frequency flicker: Twinkle while connect to the internet and
more slower when departed
(3) Been extinguished: Keep OFF
3.14 Backup & Restore
Figure 8.7
（1）Backup: Backup IP Camera all the Parameter, if you want to save all the current settings that you have
set already, you can click Submit, then all the parameters you set will store as a parameters bin file.
（2）Restore: Restore IP Camera all the Parameter, if you want to change the camera’s settings to a certain
status which has a backup, click Browse to load the bin file, then Submit it.
3.15
3.15 Log.
Figure 8.8
Record User information, including weekday, date, time, user name, visitor IP address etc.

Pyle PIPCAM5 Specifications

General

Brand	Pyle
Model	PIPCAM5
Category	IP Camera
Language	English