- 9 -
DISC / USB / SD CARD OPERATION
To insert DISC / USB / SD CARD
• To play files on a disc, insert a disc with the label surface facing upward into the disc slot.
Playback will begin automatically.
• To play files on a USB device, open the USB port cover and insert the USB storage device
into the USB port. Playback will begin automatically.
• Press the button to remove the front panel, and insert the SD card into the SD slot on
the chassis. Finally install the front panel to the chassis. Playback will begin automatically.
Eject Disc/USB/SD
• To eject a disc, press the button to stop playback. Press the (eject) button to eject the
disc and then remove it
• To eject a USB device, press the button to stop playback, then remove the USB device.
• To eject an SD card, press the button to stop playback, and press the button to release and
remove the front panel, then remove the SD card from the chassis.
Play/Pause
Press the (play/pause) button to pause or resume playback.
Next/Previous Track
• To play the next track, press the button.
• To play the previous track, press the button.
Fast Forward/Backward
• To fast forward, press and hold the button.
• To fast backward, press and hold the button.
Introduction Scan
Press the INT button to play the first 10 seconds of each track, press again to stop the introduction scan,
and play the current track.
Repeating the same track
Press the RPT button to repeat the current track, press again to stop repeat playback and resume normal
playback.
Playing all tracks in random
Press the RDM button to play all tracks in random order, press again to cancel this function.
Track/Folder Navigation
• During a disc, USB or SD card mode, press the 5/-10 button to go backward 10 tracks.
Press the 6/+10 button to jump forward 10 tracks.
• During a MP3 disc, USB or SD card mode, press and hold the 5/-10 button to go back the previous folder.
Press and hold the 6/+10 button to go to the next folder.
You can repeat this function depending on the number and level of folders.
• These buttons have no this function if the USB device or SD card has no folders.
To Next Page
Loading...
Need help?
General
