Why is there no sound coming from my Pyle Mobile Audio System PLMR18?
If your Pyle Car Receiver isn't producing any sound, first, make sure the volume isn't set to the minimum. If it is, adjust it to a comfortable listening level. Also, verify that all wiring connections are correct and secure.
How to fix a Pyle Mobile Audio System PLMR18 that has no power?
If your Pyle Car Receiver isn't turning on, it could be due to a couple of reasons. First, check that your car ignition switch is in the 'ACC' position if the receiver is connected to the car's accessory circuits. If that's not the issue, inspect the fuse and replace it if it's blown.
What to do if the radio on my Pyle Mobile Audio System PLMR18 does not work?
If the radio on your Pyle Car Receiver isn't working or the automatic station selection is failing, start by ensuring the antenna cable is firmly connected. If the issue persists, the radio signals might be too weak, in that case, try selecting a station manually.
Why aren't the operation keys working on my Pyle Mobile Audio System PLMR18?
If the operation keys on your Pyle Car Receiver aren't responding, it could be due to a microcomputer malfunction caused by noise. Try pressing the RESET button. Also, make sure that the front panel is properly fixed into its place.
General| Bluetooth | Yes |
|---|---|
| USB Port | Yes |
| SD Card Slot | Yes |
| Channels | 2 |
| Frequency Response | 20Hz-20kHz |
| Radio | AM/FM |
| FM Frequency Range | 87.5-108MHz |
| Stereo Separation | >30dB |
| Power Supply | 12V DC |
| AUX Input | Yes |
| AM/FM Radio | Yes |
| Remote Control | Yes |
| LCD Display | Yes |
| Dimensions | 4.4'' x 4.4'' x 4.1'' |
| Impedance | 4 Ohm |
Instructions for removing screws before unit installation.
Method for installing the unit in a dashboard opening.
Step-by-step guide for physically installing the unit.
Procedure for safely removing the unit from the dashboard.
Method for rear mounting the unit in specific vehicles.
Identification and location of all buttons and controls on the unit.
How and when to reset the unit to factory defaults.
Functions related to tuning and operating the radio.
Selecting the radio function from other modes.
Playing audio files from a USB drive.
Playing audio files from an SD or MMC card.
Technical details for FM and AM radio reception.
To Next Page
