Pyle PLR14MPF User Manual

6.Wiring Diagram
Antenna Socket
Main Unit
Right RCA Red
Left
Sp eaker
+ Blue
_ Blue w i th
bl ack strip
7. Troubleshooting
Fault Reason
Power indicator
1. Power supply is not correc tl y
connected .
doesn 't light on
2. Fuse is broken or power wire is
open circuit.
1. No power supply .
2.
Speaker wire is open circuit.
3.
SD/MMC card and U-disk haven 't
No sound
music of corresponding format.
4. SD/MMC card and U-disk have
bad contact .
Low sound (not
1. R esistance of the battery is high.
clear)
2. Antenna is bad contact .
1. One channel of speaker wire is
Mono track
open ci rcu it .
2.
Amplifier is fault .
4
To Battery +
To Ignition
Switch
Bl ac k
L-":"':""' __ To Battery-
Green +
Green with _
black strip
Solution
Right
Spe a ker
• Connect power supply
correctly.
• Check and connect fuse or
power wire .
• Connect power wi re .
• Connect speaker wire.
• Check the content in the
SD/MMC card and U-disk.
• Clean with alcohol.
• Replace battery .
• Tighten the antenna plug.
• Connect speaker wire .
• Replace the integrate circu it
of amplifie r.

Pyle PLR14MPF Specifications

General

Brand	Pyle
Model	PLR14MPF
Category	Car Receiver
Language	English