Pyle PLR31MP User Manual

9
SPECIFICATION
GENERAL
Power Supply Requirements : DC 12 Volts, Negative Ground
Tone Controls
- Bass (at 100 Hz) : ±10 dB
- Treble (at 10 kHz) : ±10 dB
Maximum Output Power : 4X40watts
Current Drain : 15Ampere (max.)
USB/SD/MMC PLAYER
Signal to Noise Ratio : More than 55 dB
Channel Separation : More than 50 dB
Frequency Response : 20Hz – 18 kHz
RADIO
For 2 Bands
FM
Frequency Coverage 87.5 to 108 MHz(Europe)
87.5 to 107.9MHz(USA)
IF 10.7 MHz
Sensitivity (S/N=30dB) 10dBμ
Stereo Separation >25dB
MW
Frequency Coverage 522 to 1620 kHz(Europe)
530 to 1710 kHz(USA)
IF 450 kHz
Sensitivity (S/N=20dB)
32 dBu
Remarks:
Specifications subject to change without notice.

Pyle PLR31MP Specifications

General

Brand	Pyle
Model	PLR31MP
Category	Receiver
Language	English