Pyle PLR31MP User Manual

6
LOUDNESS
Press BAND/LOUD/ENT button for several
seconds to reinforce the bass output and “LOUD”
will appear on the display. Press it for several
seconds again to release this function.
OPERATION
MODE SELECTION
Press MODE button o select radio, USB, SD or
AUX mode.
AUXILIARY INPUT
The unit can be connected to a portable audio
player through the auxiliary input jack AUX IN on
the control panel. After finishing the connection,
you can press MODE button on the control panel
to switch the mode to AUX mode.
RESET FUNCTION
Reset button must be activated with either a
ballpoint pen or thin metal object. The RESET
button is to be activated for the following reasons:
- Initial installation of the unit when all wiring is
completed.
- All the function buttons do not operate.
- Error symbol on the display.
RADIO OPERATION
SELECTING THE FREQUENCY BAND
At radio mode, press BAND/LOUD/ENT button
shortly to select the desired band.
The reception band will change in the following
order:
FM1 FM2 FM3 AM (MW)
SELECTING STATION
Press
button or button shortly to
activate automatic seek function. Press for
several seconds until “MANUAL” appears on the
display, the manual tuning mode is selected. If
both buttons have not been pressed for several
seconds, they will return to seek tuning mode and
“AUTO” appears on the display.
AUTOMATIC MEMORY STORING &
PROGRAM SCANNING
- Automatic memory storing
Press AS/PS (Navi-SCH) button for several
seconds to store the strongest stations that
searched into the corresponding preset
number button.
- Program scanning
Press AS/PS (Navi-SCH) button shortly to
scan preset station.
STATION STORING
Press any one of the preset buttons (1 to 6) to
select a station, which had been stored in the
memory. Press this button for several seconds to
store the current station into the number button.
RBDS OPERATION
In FM mode, press TA button, the unit will search
Traffic Announcement automatically. When
received a Traffic Announcement station, the unit
will change to the Traffic Announcement station
automatically.
Press
TA button again will exit TA mode.
USE
PTY BUTTON
Press
PTY button will enter PTY SELECT
MENU. In the menu, rotate the volume knob or
use the preset buttons (1 to 6) to select the items.
Then press
/ button, the unit will search the
program automatically. If there is a corresponding
program searched, the unit will play the program.
If there is no corresponding program, “PTY
NONE” will be displayed on LCD.
When you set AREA EUR in system setting,
pressing
AF button can switch on or off RDS
mode.
USB OPERATION
On the control panel of the unit, there is an USB
interface . You can connect an USB driver
through this interface .
When you connect an USB driver through the
interface, the unit will search the MP3 files or
WMA files in the USB driver and start to play MP3
files or WMA files automatically. If in other mode,
you can also press MODE button to select USB
mode.
SELECTING TRACKS
Press
button or button to move to the
previous track or the following track. Track
number shows on display.
Hold
button or button to fast reverse or
fast forward. Normal play starts from when you
release the button.

Pyle PLR31MP Specifications

General

Brand	Pyle
Model	PLR31MP
Category	Receiver
Language	English