Pyle PT696BT User Manual

3 www.PyleUSA.com www.PyleUSA.com 8
Operating Instructions
Preparation before operation
・ This product must be placed on a flat, solid object to ensure that it has sufficient capacity
to support the product without falling.
・ Please use this product according to the safety requirements in front of this manual and
connect with other products (TV, speaker, DVD player or player) as required.
・ Open the audio source device connected to this product
-Press the power switch button on the panel to turn ON the power.
Operation
Channel Selection
The product has 11 pairs channels input, digital channel input and analog channel input:
Select HDM11 -2, OPTICAL, COAXIAL and USB digital input by pressing digital input
button on the panel or remote control.
Select AUX, ST, DVD/CD and FM by pressing the 'analog input' button on the panel or
remote control.
Channel Mode
Press "channel mode" select2.1 or 5.1 channels on the panel or remote control
Volume Adjustment
Total volume adjustment:
Rotate the "VOLUME/MUUT VOLUME/multi-function adjusting knob on the panel, or
press the 'total VOLUME +/-' button on the remote control to adjust the VOLUME.
Center; surround, heavy bass channel volume adjustment:
Press "main menu" on the panel, adjust the screen to show "CV xx" "the SRV xx" "xx"
and "SWVxx SLV", then rotate the MULTI VOLUME/multifunctional adjustment button
on the panel, adjust the Volume of center channel, right surround channel, left surround
channel and the heavy bass channel.
Press the "Center volume +/-" surround volume +/-" and "heavy bass +/-" button on the
remote control, adjust the volume ofCenter, surround and heavy bass. Channel.
System Connection
DVD player
With optical/Coaxial digital
signal output player
Blu-ray player with HDMI output
TV with HDMI input

Pyle PT696BT Specifications

General

Brand	Pyle
Model	PT696BT
Category	Receiver
Language	English